Trusted Residential Heating in Pelham, NH
Need Heating Repair or Replacement in Pelham, NH?
Boiler, furnace, and heat pump service from a family-owned team based in Dracut, Massachusetts
Dees Plumbing & Heating provides residential heating in Pelham, NH, including boiler and furnace repair, replacement, and heat pump installation. The team works from Dracut, MA, right across the state line, and holds Massachusetts Master Plumber License MP:16979. You get a free inspection, an upfront price before work starts, and 24/7 availability when the heat goes out.
Who handles heating in Pelham from just over the Dracut line?
We do, and the distance is the point. Pelham is New Hampshire’s southernmost town, and Dracut is the Massachusetts town directly south of it. The two share more than a border. Pelham was incorporated in 1746 from parts of Dunstable and Dracut, so the towns were once the same place.
For you, that means a short drive on roads we already use. Route 38 and Mammoth Road both run from Dracut straight into Pelham. A technician does not need to cross the region to reach your boiler.
- Services: boiler and furnace repair, replacement, new heat pump installs, and seasonal tune-ups
- Based at: 10 Washington Ave, Dracut, MA, the next town south
- Availability: 24/7, including nights, weekends, and holidays
- Pricing: free inspection, then an upfront price before work begins
- Credentials: Massachusetts Master Plumber License MP:16979, insured, BBB-registered
- Reviews: more than 100 Google reviews on our profile, rated five stars
- Equipment we work with: Weil-McLain, Navien, Rheem, and Rinnai
- Phone: 978-429-5576
What does your heating fuel mean for the repair?
Southern New Hampshire homes heat a lot of different ways, and the fuel changes what usually fails. Tell us what you burn when you call so the right technician and parts arrive the first time.
Your heating setup | What usually goes wrong |
Oil-fired boiler or furnace | Clogged filters and nozzles, ignition and control failures, and fuel line or tank trouble |
Propane or natural gas boiler or furnace | Ignition and flame sensor problems, pressure issues, and venting trouble |
Electric baseboard or electric furnace | Failed elements, thermostat trouble, and breaker or wiring problems |
Heat pump | Weak output in a cold snap, controls that stop responding, and outdoor unit icing |
If you are not sure what you have, send a photo of the unit’s label. We will identify it before we talk about fixing it.
What does residential heating repair look like for a Pelham home?
If you searched for a heating contractor in Pelham because something quit, this is the repair side of our work.
- Boilers: leaks, low pressure, failed ignition, circulator trouble, and radiators that heat unevenly. Our boiler service team handles repair and replacement.
- Furnaces: no-start calls, blower and airflow problems, and short cycling. See our furnace repair and installation work.
- Heat pumps: reduced heating output and control faults, plus seasonal checkups through our heat pump repair and tune-up visits.
- Thermostats: zones that will not call for heat and settings that drift, covered by our thermostat setup and testing
When the heat is already out, our emergency heating repair service runs around the clock.
When is it time to replace a heating system instead of fixing it?
A repair makes sense when one part failed on a unit that otherwise runs well. Replacement deserves a hard look when:
- The same fault keeps returning after repairs
- A boiler is leaking from the body, or a furnace has a cracked heat exchanger
- Parts for an older model are hard to find
- Your fuel bills climb with no change in how you live
We show you both numbers, the repair and the replacement, and let you choose. If you do replace, our crew handles the full heating installation: boiler swaps, furnace replacements, and new heat pump systems sized to the house, plus new construction plumbing and heating for additions and gut renovations.
How do you compare two heating quotes in Pelham?
Two quotes that look the same on the bottom line are often different jobs. Put them side by side on these points.
What to compare | Why it matters |
Equipment brand and model | Different models carry different efficiency and parts availability |
Sizing method | A unit sized to the house runs better than one guessed from the old unit |
What is included | Piping, venting, controls, and old equipment removal can be inside or outside the price |
Licensing and insurance | The contractor should give you a license number you can check |
Warranty terms | Parts and labor are often covered differently |
Timeline | Heat in January should not wait three weeks |
A fair quote answers every row without hesitation. Ours does.
Is a heat pump worth it in Pelham with NHSaves rebates?
It can be. NHSaves is the rebate program run by New Hampshire’s electric utilities, and it offers rebates on qualifying heat pump installations. The details vary and change over time, so treat this as the general shape, not a quote. Amounts depend on what you heat with now, and replacing electric resistance heat can qualify for a higher rebate than switching from oil, gas, or propane. Eligibility generally depends on being a residential electric customer of a participating utility, and some rebates ask you to verify your current heating before the install. Instant incentives may also be available through contractors at the point of sale, and funding can run out.
You can see the current programs and requirements on NHSaves heat pump rebates and confirm which utility serves your address before you commit, because programs and rules change.
The rebate is not the only question. A heat pump has to carry the house through a New Hampshire January, so sizing and backup heat matter. We walk through that with you before quoting.
Ask About Heat Pump Options and we will go through what fits your house.
How do you check a heating contractor's license in New Hampshire?
Do this for every contractor, including us. It takes five minutes.
- Ask for the license number. New Hampshire licenses plumbers and gasfitters through the Mechanical Safety and Licensing Board, part of the state’s Office of Professional Licensure and Certification.
- Verify it on the state’s license lookup. Check that the license is active and matches the company name on the quote.
- Ask for proof of insurance. A certificate should come straight from the insurer.
- Get the price in writing. The scope, equipment, and total should match what was said on the phone.
- Ask who does the work. You should know who will be in your basement.
Our Massachusetts credential is Master Plumber License MP:16979. If you want to see anything else before you hire us, ask and we will send it.
What do neighbors say about our heating work?
We are newer in Pelham, so here is what customers a few miles south say on our Google profile. One had a heat outage fixed the same night after calling. Another had a new boiler installed after a bad experience with a previous contractor. A third had a new steam furnace installed after an earlier plumber walked away from the job and left them without heat. Several mention clear explanations and fair pricing.
How do you get from Pelham to our Dracut office?
Most heating calls are service visits at your house, so you will not need to come to us. These directions are for dropping off a part or just seeing how close we are.
- From Pelham Center: follow NH 111A (Marsh Road) west to NH 128 (Mammoth Road), then head south into Dracut.
- From the Village Green and Town Hall area: take NH 38 (Bridge Street, also Lowell Road in places) south. It runs straight from Pelham into Dracut, where it continues as Route 38.
- From the Windham side: follow NH 128 (Mammoth Road) south through Pelham and across the state line into Dracut.
- Final approach in Dracut: our office is at 10 Washington Ave. Open that address in your map app for the last turns.
What other nearby towns do we serve for residential heating?
Our dedicated heating pages cover these communities in Massachusetts:
- Residential Heating in Dracut, MA
- Residential Heating in Lowell, MA
- Residential Heating in Methuen, MA
- Residential Heating in Tewksbury, MA
- Residential Heating in Andover, MA
- Residential Heating Service in Lawrence, MA
- Residential Heating in Acton, MA
- Residential Heating in Amesbury, MA
Pelham sits right beside Dracut, so if you are in southern New Hampshire and not sure we reach you, call and ask.
Frequently Asked Questions
We work in Pelham, which borders our hometown of Dracut. Call 978-429-5576 and tell us your address. We will confirm we can take the job before we schedule it.
We aim for same-day service and answer calls 24 hours a day. Dracut and Pelham are neighboring towns, so the drive is short. Tell us what the system is doing and whether anyone in the home is at risk.
We repair boilers, furnaces, and heat pumps, along with thermostats and controls. Tell us your fuel type and the make of the unit when you call, so we can send the right technician and parts.
Repair makes sense when one part failed on a unit that otherwise runs well. Replacement deserves a look when the same problem returns, the unit leaks from the body, or parts are hard to find. We price both options so you can compare them.
Yes. NHSaves offers rebates on qualifying heat pump installations through New Hampshire's electric utilities. Amounts vary with what you heat with now, and eligibility depends on your electric utility. Check current terms before you commit, since programs and funding change.
Ask for the license number, then verify it with the state. New Hampshire licenses plumbers and gasfitters through the Mechanical Safety and Licensing Board, part of the Office of Professional Licensure and Certification. Ask for proof of insurance as well.
No. The inspection is free, and you get an upfront price before work starts. If the scope changes, we tell you before we continue.
Yes. A tune-up catches worn igniters, pressure problems, and dirty components before they fail in the cold. Our heating system maintenance visits are built for that.
Yes. Boilers and hot water equipment often overlap, so one visit can cover both. See our water heater service for details.
Charles Dees started the company in 2021, and it is family-owned and based in Dracut.
Cold house in Pelham? Get a technician from next door.
Get a free inspection and a price you can read before any work begins. We answer around the clock, so a cold house does not have to wait for morning.
